Description

With this kit it is easy to make your own intricate Flow Bars. Just coat the interior with Shelf Primer, stack some strips of glass on the stainless steel rods and fire in the kiln. As the glass softens and flows over the rods into the container below, the pattern swirls and moves creating unique designs that can be consistent throughout the length of the finished glass bar. The results are beautiful and breathtaking glass pattern bars that can be sliced on a diamond saw to reveal their inner design.

The Basic FFLOW 300mm kit includes 2 – pre-drilled soft brick end pieces, 2- stainless steel rods, 2 – fiberboard walls, instructions and firing schedules. Overall measurement is approx. 390mm in length and 110mm in width. Fits into a StudioPro 17 & GT4050 kiln. For smaller kilns the Stainless Steel bars can be cut shorter to suit.

The Basic FFLOW 500mm kit includes 2 – pre-drilled soft brick end pieces, 2- stainless steel rods, 2 – fiberboard walls, instructions and firing schedules. Overall measurement is approx. 590mm in length and 110mm in width. Fits into a GTS2541 or Larger Kiln.

The Basic FFLOW 600mm kit includes 2 – pre-drilled soft brick end pieces, 2- stainless steel rods, 2 – fiberboard walls, instructions and firing schedules. Overall measurement is approx. 690mm in length and 110mm in width. Fits into a GTS2541 or Larger Kiln.

.